.STERIPLEX HC Activation & Sterilization



To print, please download STERIPLEX HC Application & Sterilization Instructions PDF.

STERIPLEX HC is an effective Sporicide/Sterilant for use with semi-critical Medical Devices and on non-critical surfaces.

STERIPLEX HC is a two part system. Activate STERIPLEX HC prior to use by combining  STERIPLEX HC (Part A) and STERIPLEX HC Activator (Part B).

STERIPLEX HC (Part A)

Main ingredient of one gallon container

STERIPLEX HC (Part B)

Four ounce container

 

For optimal results, please carefully follow mixing instructions:

  1. Using appropriate personal protective equipment (PPE), remove the cap on the STERIPLEX HC (Part A) container to expose the opening.
  2. Obtain the STERIPLEX HC Activator (Part B) and remove the child protective cap. Carefully pour the STERIPLEX HC Activator (Part B) into the main container and shake small bottle to release entire contents.
  3. Replace cap and safely discard the spent STERIPLEX HC Activator (Part B) container in an approved waste receptacle as directed. Replace the cap on the main container.
  4. Thoroughly mix the combined solution for approximately 15 seconds.

Application Methods - For use with non-electrical or non-critical/semi-critical Medical Devices

STERIPLEX HC as a Sporicide (Sterilant)

Pre-clean equipment surfaces prior to immersing equipment. Dismantle devices prior to pre-cleaning, if necessary.

  1. Pour desired amount of solution into a tray or receptacle that will hold the targeted items and allow for complete immersion in solution.
  2. Immerse equipment or targeted items for a minimum of 180 minutes.
  3. Transfer equipment or targeted items to a rinse bath to remove the solution.  Dipping them a couple of times into the rinse bath will thoroughly remove any solution.
  4. Place on a clean surface to allow items to air dry prior to reuse.

STERIPLEX HC as a Disinfectant

Pre-clean equipment surfaces prior to immersing equipment. Dismantle devices prior to pre-cleaning, if necessary.

  1. Pour desired amount of solution into a tray or receptacle that will hold the targeted items and allow for complete immersion in solution.
  2. Immerse equipment or targeted items for a minimum of 5 minutes.
  3. Transfer equipment or targeted items to a rinse bath to remove the solution.  Dipping them a couple of times into the rinse bath will thoroughly remove any solution.
  4. Place on a clean surface to allow items to air dry prior to reuse.

STERIPLEX HC as a Tuberculocide

Pre-clean equipment surfaces prior to immersing equipment. Dismantle devices prior to pre-cleaning, if necessary.

  1. Pour desired amount of solution into a tray or receptacle that will hold the targeted items and allow for complete immersion in solution.
  2. Immerse equipment or targeted items for a minimum of 15 minutes.
  3. Transfer equipment or targeted items to a rinse bath to remove the solution.  Dipping them a couple of times into the rinse bath will thoroughly remove any solution.
  4. Place on a clean surface to allow items to air dry prior to reuse.

STERIPLEX HC can be applied to surfaces by conventional (spray) (mopping) (cloth) or (sponge) method.


To Fill or (refill) empty spray bottle:
  1. Remove trigger sprayer (or cap) from empty bottle.
  2. Unscrew cap (or open spigot) and pour contents into empty bottle.
  3. Replace trigger sprayer (or cap) and use as instructed.

Refill sprayer only with STERIPLEX HC mixture.



Homepage